Gateway MX6632j 8511180 - Hardware Reference Gateway Notebook - Page 17
Connecting the dial-up modem
View all Gateway MX6632j manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
www.gateway.com Connecting the dial-up modem 3 Plug the power cord into a wall outlet. The battery charge indicator turns on (see "Front" on page 6 for the location of the battery charge indicator). If the battery charge indicator does not turn on, complete the following steps until it turns on: a Unplug the adapter from your notebook, then plug it back in. b Press FN+F1 to toggle the status lights on and off. 4 When you finish using your notebook for the first time, turn off your notebook and leave your notebook connected to AC power until the battery charge indicator turns blue. Protecting from power source problems Warning High voltages can enter your notebook through both the power cord and the modem connection. To protect your notebook and avoid electrical shock, use a surge protector. If you have a telephone modem, use a surge protector that has a modem jack. If you have a cable modem, use a surge protector that has an antenna/cable TV jack. During an electrical storm, unplug both the surge protector and the modem. During a power surge, the voltage level of electricity coming into your notebook can increase to levels far above normal levels and cause data loss or system damage. Protect your notebook and peripheral devices by connecting them to a surge protector, which absorbs voltage surges and prevents them from reaching your notebook. Connecting the dial-up modem Warning To reduce the risk of fire, use only No. 26 AWG or larger telecommunications line cord. Your notebook has a built-in 56K modem that you can use to connect to a standard telephone line. To connect the modem: 1 Insert one end of the modem cable into the modem jack side of your notebook. on the right 13