GE 24116 Instruction Manual - Page 11

Setup, cont. Controlling Devices Requiring Separate Power On and Off Buttons, cont. To turn the TV off, press and release the ON-OFF button to transmit the Power Off button command. This method can be applied similarly to any device and is available for all Modes. Note this feature is not supported by all codes. DVD/DVR Punch-Through Feature This remote allows the 6 DVR transport buttons (i.e., PLAY, PAUSE, STOP, FF, REWIND, and REC) to PunchThrough control from any Mode programmed with TV, SAT or Cable codes to the last DVD, DVR or VCR programmed Mode you used. Normally other types of remotes only punch-through (from another Mode) on the 6 DVR buttons to the device programmed under the DVR Mode button. This is not much use if you are using a DVD programmed under a Mode other than DVR. For example, if you have 2 DVD, or DVR devices programmed into this remote, the last one you accessed on the remote will be the one that has control of the 6 DVR transport buttons when in any other Mode. This feature will not operate if the programmed TV, SAT or Cable code has its own DVR transport button control e.g., a TV Combo, SAT/PVR, etc. Volume/Mute Control and Punch-Through Feature This remote lets you select which device Mode controls your Volume/Mute buttons. The remote is initially set (factory default) for all device Modes programmed with "Visual" codes (e.g., TV, DVD, DVR, SAT & CABLE) and "Audio" codes (e.g., CD & AUDIO) to use their own Volume/Mute control if present. If the programmed "Visual" code has no Volume/Mute operation of its own then those buttons will punchthrough control to the TV Mode device without needing to change to TV Mode. Please refer to the next page for more information. 11