GE 24904 Instruction Manual - Page 7

Programming for Cable /DVD Use the CBL/DVD button to assign your cable box or DVD player. This button could also be assigned to a CDplayer, another TV, VCR or DVD player. 1. Manually turn on the Cable Box, DVD Player, or other device. 2. Press and hold the SETUP button until the INDICATOR LIGHT lights, then release the SETUP button. BLINK 3. Press and release the CAB/DVD button (the INDICATOR LIGHT will blink then remain lit). 4. Find the three digit code for your device in the code list in the back of this book and enter it using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off. OFF 5. Aim the remote at your device and press the POWER button. Your device should turn off. Note: If your device does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method on page 8. 6. With your device on, press CHANNEL UP. If the device responds, no further programming is required. CAB/DVD/DEVICE CODE 7. Enter your code here for easy reference. 6