GE 28115FE1 User Guide - Page 32
Handset Sound Signals, Troubleshooting Guide - cordless phone
UPC - 044319701678
View all GE 28115FE1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Handset Sound Signals Signal Meaning A long warbling tone (with ringer on) Signals an incoming call Three short beeps (several times) Page signal Single beep every 7 seconds Low battery warning Troubleshooting Guide Caller ID Solutions No Display • The battery must be fully charged. Try replacing the battery. • Make sure that the unit is connected to a non-switched electrical outlet. Disconnect the unit from the wall and plug it in again. • You must subscribe to Caller ID service from your local telephone company in order to receive Caller ID records. Caller ID Error Message • This message indicates either the presence of noise on the line, or that an invalid message has been sent from the telephone company. Cordless Phone Solutions No dial tone • Check installation: Make sure the base power cord is connected to a working electrical outlet. Make sure the telephone line cord is connected to the base unit and the wall phone jack. • Connect another phone to the same modular jack; if the second phone doesn't work, the problem might be with your wiring or local service. • The handset may be out of range of the base. Move closer to the base. • Make sure the battery is properly charged (for 12 hours). • Ensure the battery pack is installed correctly. 32