GE 29861GE2 User Guide - Page 6
Installing the Battery
View all GE 29861GE2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Installing the Battery In the event of a power loss, a 9-volt battery (not included) Battery enables the answerer to retain greetings and messages stored in compartment door memory. To install the battery: 1. Remove the battery compartment door on the bottom of the unit by loosening the screw with a Phillips screwdriver. Lift the door. 2. Connect a fresh 9-volt alkaline battery (not included). The large and small contacts on the battery clip and the battery Battery clip -+ will interlock. Once connected, place the battery inside the battery compartment. Battery 3. Replace the battery compartment door and tighten the screw. - + NOTE: If the battery is low or not installed, the unit announces "Low Battery" at the end of message playback. CAUTION: • Never install telephone wiring during a lightning storm. • Never touch uninsulated telephone wires or terminals, unless the telephone line has been disconnected at the network interface. • Use caution when installing or modifying telephone lines.