GE 45137 User Manual - Page 7
three seconds., Step 4, Installation
UPC - 043180451378
View all GE 45137 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
three seconds. Step 4 - Release all buttons. The Control Center will sound two beeps and flash the green power indicator, this indicates a test signal was sent to the Silent Input DC 12V -+ Alert. When the Silent Alert receives the test Mute Signal, the LED indicator will stop flashing, Learn indicating it has been linked with your Alert Chime Off Control Center. Reattach the Silent Alert to the base. Anytime the alarm is triggered (in Armed HOME or AWAY), and the siren sounds, the Control Center will send a signal to the Silent Alert to begin alternately flashing its LED indicators. The Silent Alert will continue to flash the LED indicators until the Control Center sends a disarm signal. Note: Even if the Control Center is disconnected from power or destroyed, the Silent Alert will continue to flash LED indicators. Installation You will need to determine if the surface to mount the Silent Alert is smooth or rough/porous. If smooth you can use the included double sided tape. When using doublesided tape apply to clean dry surface. Remove one side of the tape and attach it to the back side of the Silent Alert. Once the mounting surface is ready, remove the other side of the double side tape and press into position.