GE 51207 User Manual - Page 12
Testing Motion Sensor Operation, Care And Maintenance
 |
UPC - 043180506436
View all GE 51207 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
13 the remote at the front of the alarm and press and hold the ARM and DISARM buttons on the remote control for 2 seconds. To turn off the panic alarm, aim the remote at the front of the alarm and press the DISARM button. TESTING MOTION SENSOR OPERATION 1. Set remote to CHIME mode and press ARM button; the chime will sound once. 2. After initial chime, wait 15 seconds and wave hand in front of the sensor. If chime sounds immediately, the sensor is working properly. 3. To discontinue test, point remote at front of alarm and press DISARM. Set remote to ALARM mode. CARE AND MAINTENANCE To clean the alarm housing, use a soft
-
1 -
2
-
3
-
4
-
5
-
6
-
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15
 |
 |
13
the remote at the front of the alarm and
press and hold the ARM and DISARM
buttons on the remote control for 2
seconds. To turn off the panic alarm, aim
the remote at the front of the alarm and
press the DISARM button.
TESTING MOTION SENSOR OPERATION
Set remote to CHIME mode and press
ARM button; the chime will sound
once.
After initial chime, wait 1² seconds
and wave hand in front of the sensor.
If chime sounds immediately, the
sensor is working properly.
To discontinue test, point remote at
front of alarm and press DISARM. Set
remote to ALARM mode.
CARE AND MAINTENANCE
To clean the alarm housing, use a soft
1.
2.
3.