GE AEE18DK Owners Manual - Page 12
Prepare The Case, Prepare The Window, Remove The Air Conditioner, From The Case, Cont.
View all GE AEE18DK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Window Installation Instructions 3 REMOVE THE AIR CONDITIONER FROM THE CASE (cont.) E Remove the locking screw and locking bracket from the lower frame. Save to reinstall later. F Remove the ground screw and save to reinstall later. 5 PREPARE THE CASE A Install the top mounting rail with 4 type B screws from the inside of the case. Press firmly to drive the screws into the gasket and through the top mounting rail. Top mounting rail Remove the ground screw and save to reinstall later G Slide the air conditioner from the case by gripping the base pan handle and pulling forward while bracing the case. B Insert the frames for the accordion panels into the top mounting rail and the bottom frame guides. Attach the accordion panels to the side of the case using 3 type A screws on each side. NOTE: When attaching the accordion panels, make sure to only screw the inner panels to the case sides. Top mounting rail 4 PREPARE THE WINDOW Cut the window sash seal to the proper length. Peel off the backing and attach the seal to the underside of the window sash. Type A screws Bottom mounting rail BACK 12