GE AEL12AP User Manual - Page 4

About the controls on the air conditioner . Features and appearance will vary. Lights next to the touch pads on the air conditioner control panel indicate the selected settings. NOTE: The display always shows the room temperature except when setting the Set temperature or the Delay timer. Light indicates the unit is in the temperature or delay time Set mode. Light indicates the delay timer is set. Air Conditioner Controls Controls Delay 1-24hr Delay timer Decrease Mode select Fan speed Decrease Temperature set Increase and Decrease Fan Fan Delay timer Increase Auto Fan on Fan speed Increase Unit power on/off Remote Control Power Pad Turns air conditioner on and off . When turned on, the display will show the room temperature . Display Shows the room temperature or time remaining on the Delay timer . Shows the Set temperature while setting the temperature in Cool or Energy Saver modes . The Set light will turn on while setting . Temp Increase ▲ /Decrease ▼ Pads Use to set temperature when in Cool or Energy Saver mode . The Set light will turn on while setting . Delay Timer Increase▲ (+) /Decrease ▼(-) Pads Each touch of the Increase ▲ / Decrease ▼ pads on the unit or the Increase + / Decrease - pads on the remote control will set the delay time when using the Delay 1-24hr timer . The Set light will turn on while setting . Fan Speed Pads Use to set the fan speed to Low, Med, High or Auto on the unit . NOTE: On the remote control, use the fan speed Increase + / Decrease - pads to set the fan speeds to Low, Med or High . Use the Auto pad to turn Auto fan on . Mode Pad Use to set the air conditioner to Cool, Energy Saver or Fan Only mode . Delay Pads Delay ON-When the air conditioner is off, it can be set to automatically come on in 1 to 24 hours at its previous mode and fan settings . Delay OFF-When the air conditioner is on, it can be set to automatically turn off in 1 to 24 hours . How to set: Press the Delay 1-24hr pad on the unit or on the remote control . Each touch of the Increase ▲ / Decrease▼pads on the unit or the Increase + / Decrease - pads on the remote control will set the timer in 1-hour intervals . The Set light will turn on while setting . To review the remaining time on the Delay 1-24hr timer, press the Delay 1-24hr pad on the unit or on the remote control . Use the Increase ▲ / Decrease ▼ pads on the unit or the Increase + / Decrease - pads on the remote control to set a new time if desired . To cancel the timer, press the Delay 1-24hr pad until the light on the Delay 1-24hr pad goes off . Note: The default temperature reading on the display is degree Fahrenheit ( °F) . To change the display to degree Celcius (°C), press the Temp Increase ▲ and Temp Decrease ▼ buttons together and hold for 3 seconds . Repeat the process to change back to degree Fahrenheit (°F) 4