GE AFHC21AM Use and Care Manual - Page 3

Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Support About the controls on the air purifier. Power On/Off Filter reset indicator Fan speed indicators Timer indicators indicators Power On/Off indicator Fan speed indicators ge.com Filter reset indicators Model AFHC21AM Model AFHC09AM Manual Controls Power On/Off Button Press to turn the air purifier on and off. Fan Speed Adjustment Button Press to adjust the fan motor speed setting. Model AFHC21AM - Press to select from levels 1 (low) to 4 (high). Model AFHC09AM - Press to select Low, Medium or High. Timer Adjustment Button (Model AFHC21AM Only) Press to select from timer hour settings 1 hr., 2 hr. or 4 hr. The air purifier will run for the selected number of hours and then turn off. Filter Reset Button The filter reset indicator light will come on when the filter needs to be replaced. To reset the filter indicator after replacing the filter, if no filter lights are on: For the Pre-Filter, press the FILTER RESET button once and the Pre light will flash; then press and hold for 2 seconds. The indicator light for the filter will go off. For the 99.97% True HEPA Filter, press the FILTER RESET button twice and the HEPA light will flash; then press and hold for 2 seconds. The indicator light for the filter will go off. To reset the filter indicator after replacing the filter, if one or both lights are on: press and hold the FILTER RESET button for 2 seconds. One or both indicator lights will go off. Remote Control - Model AFHC21AM Only Power On/Off Button Press to turn the air purifier on and off. Fan Speed Adjustment Button Press to adjust the fan motor speed setting. Press to select from levels 1 (low) to 4 (high). Power On/Off button Fan speed SPEED adjustment button Timer adjustment TIMER button Timer Adjustment Button Press to select from timer hour settings 1 hr., 2 hr. or 4 hr. The air purifier will run for the selected number of hours and then turn off. Battery - CR2025 Battery clip Battery Remote body Install the battery that comes with the remote control. Remove the clip from the end of the remote control. Install the battery into the clip. Replace the clip into the remote control. 3