GE AHV05LP Owners Manual - Page 9

Installation Instructions r_IPREPARING THEWINDOW FOR INSTALLATION r_ Measure the width of the window opening and mark the center line on the inside windowsill. Center line @ Install the window lock bracket behind the inner windowsill, with the short side of window lock. Use 2 type B screws provided. The window lock bracket helps hold unit securely in place. Be sure to place window lock bracket edge flush against back or inner sill. Inner sill _ Type B screws Window lock brackets Outer sill, !_ Center line Short side f []INSTALL THEAIR CONDITIONER IN THEWINDOW [] Set the air conditioner in the window so that is centered. Place the air conditioner so that front edge of the bottom mounting rail is against the back edge of the sill. Top channel- About 1/4" Bottom guide Window lock bracket D Bring the window down so that the front edge of the top mounting is in front of the window. IVlake sure that that air conditioner is level or tilting slightly to the outside. L__L L_2II D Remove backing on bottom seal. Place seal, adhesive side down, on the bottom of the air conditioner behind the bottom mounting rail. 3ottom Seal j43ottom _ mounting rail Front Type B screws [ Extend the curtain panels until they fill the window. IVlark the location of the holes in each corner. Use the drill and 1/8" drill bit to drill pilot holes. Use 4 type B screws to to secure the side panels in place. 9