GE AJCM08ACG Use and Care Manual - Page 4
Controls
View all GE AJCM08ACG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
$ERXWWKHFRQWUROVRQWKHDLUFRQGLWLRQHU³&RRO2QO\0RGHOV Appearance may vary. On Off Delay Hrs On Off Reset Filter Temp Cool Fan Hi Mode Med Low Power On/Off Power Cool Fan Mode Temp High Med On Delay Hrs Low Off Controls Air Conditioner Controls Lights beside the touch pads on the air conditioner control panel indicate the selected settings. 1. Power On/Off Turns air conditioner on and off. 2. Display Displays the temperature setting. Displays hours when setting the timer. 3. Mode On the remote control, use to set the air conditioner to Cool or Fan mode. On the air conditioner controls, use to set Cool or Fan mode at High, Med or Low fan speed. Indicator lights on the air conditioner controls will show the mode and fan speed selected. 4. Temp Increase + /Decrease - Pads Use to set temperature when in COOL mode. 5. Fan Speeds Use to set the fan speed at Low, Med or High. 6. Delay Hrs 2Q³When the air conditioner is off, it can be set to automatically turn on in half an hour to 24 hours at its previous setting. Each touch will set the time in half hours up to 10 and then in hours up to 24. Remote Control To cancel the Delay Timer, press the On pad until "CL" appears. Then wait until the display turns off. 2II³When the air conditioner is on, it can be set to automatically turn off in half an hour to 24 hours. Each touch will set the time in half hours up to 10 and then in hours up to 24. To cancel the Delay Timer, press the Off pad until "CL" appears and wait for the set temperature to be displayed. The unit will now resume normal operation. 7. Reset Filter LED will turn on when fan has accumulated 250 hours of run time as a reminder to clean filter. Press Reset Filter to turn off the LED and reset the accumulated run time. 8. Remote Control Signal Receiver NOTE: When the air conditioner is turned on, it will automatically start in the setting last used. Remote Control To ensure proper operation, aim the remote control at the signal receiver on the air conditioner. The remote control signal has a range of up to 21 feet. Make sure nothing is between the air conditioner and the remote control that could block the signal. 0DNHVXUHEDWWHULHVDUHIUHVKDQGLQVWDOOHGFRUUHFWO\³VHH the Care and Cleaning section. 4