GE AJCQ12DCF Use and Care Manual - Page 4

Controls

Page 4 highlights

$ERXWWKHFRQWUROVRQWKHDLUFRQGLWLRQHU³&RRO2QO\0RGHOV Appearance may vary. On Off Delay Hrs On Off Reset Filter Temp Cool Fan Hi Mode Med Low Power On/Off Power Cool Fan Mode Temp High Med On Delay Hrs Low Off Air Conditioner Controls Lights beside the touch pads on the air conditioner control panel indicate the selected settings. Controls Remote Control Power On/Off Turns air conditioner on and off. Display Displays the temperature setting. Displays hours when setting the timer. Mode On the remote control, use to set the air conditioner to Cool or Fan mode. On the air conditioner controls, use to set Cool or Fan mode at High, Med or Low fan speed. Indicator lights on the air conditioner controls will show the mode and fan speed selected. Temp Increase + /Decrease - Pads Use to set temperature when in COOL mode. Fan Speeds (Remote control only) Use to set the fan speed at Low, Med or High. Delay Hrs 2Q³When the air conditioner is off, it can be set to automatically turn on in half an hour to 24 hours at its previous setting. Each touch will set the time in half hours up to 10 and then in hours up to 24. To cancel the Delay Timer, press the On pad until "CL" appears. Then wait until the display turns off. 2II³When the air conditioner is on, it can be set to automatically turn off in half an hour to 24 hours. Each touch will set the time in half hours up to 10 and then in hours up to 24. To cancel the Delay Timer, press the Off pad until "CL" appears and wait for the set temperature to be displayed. The unit will now resume normal operation. Reset Filter LED will turn on when fan has accumulated 250 hours of run time as a reminder to clean filter. Press Reset Filter to turn off the LED and reset the accumulated run time. Remote Control Signal Receiver NOTE: When the air conditioner is turned on, it will automatically start in the setting last used. Remote Control „To ensure proper operation, aim the remote control at the signal receiver on the air conditioner. „Make sure nothing is between the air conditioner and the remote control that could block the signal. „The remote control signal has a range of up to 21 feet. „Make sure batteries are fresh and installed FRUUHFWO\³VHHWKH&DUHDQG&OHDQLQJVHFWLRQ 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

Power
Cool
On
High
Med
Low
Off
Fan
Mode
Temp
Delay
Hrs
4
On
Cool
Delay Hrs
Temp
Off
On
Mode
Power
On/Off
Off
Reset
Filter
Fan
Hi
Med
Low
Air Conditioner Controls
Power On/Off
Turns air conditioner on and off.
Display
Displays the temperature setting. Displays
hours when setting the timer.
Mode
On the remote control, use to set the air
conditioner to
Cool
or
Fan
mode.
On the air conditioner controls, use to set
Cool
or
Fan
mode at
High, Med
or
Low
fan
speed. Indicator lights on the air conditioner
controls will show the mode and fan speed
selected.
Temp Increase + /Decrease – Pads
Use to set temperature when in
COOL
mode.
Fan Speeds (Remote control only)
Use to set the fan speed at
Low, Med
or
High
.
Delay Hrs
When the air conditioner is off, it can
be set to automatically turn on in half an
hour to 24 hours at its previous setting. Each
touch will set the time in half hours up to 10
and then in hours up to 24.
To cancel the Delay Timer, press the
On
pad until
“CL” appears. Then wait until the display turns off.
When the air conditioner is on, it can be set to
automatically turn off in half an hour to 24 hours.
Each touch will set the time in half hours up to 10
and then in hours up to 24.
To cancel the Delay Timer, press the
Off
pad until
“CL” appears and wait for the set temperature to
be displayed. The unit will now resume normal
operation.
Reset Filter
LED will turn on when fan has accumulated 250
hours of run time as a reminder to clean filter.
Press
Reset Filter
to turn off the LED and reset the
accumulated run time.
Remote Control Signal Receiver
NOTE:
When the air conditioner is turned on, it will
automatically start in the setting last used
.
To ensure proper operation, aim the remote
control at the signal receiver on the air
conditioner.
The remote control signal has a range of up to
21 feet.
Make sure nothing is between the air conditioner
and the remote control that could block the
signal.
Make sure batteries are fresh and installed
Remote Control
Appearance may vary.
Remote Control
Lights beside the touch pads on the air conditioner
control panel indicate the selected settings.
Controls