GE CS980SNSS Quick Specs - Page 1

30" CS980SN GE Café™ 30" Free-Standing Radiant Range with Baking Drawer Dimensions and Installation Information (in inches) 36-1/4"+_1/4 37-1/4"* Electrical Requirements: 240v/208v; 60Hz, 40A Effective January 1, 1996, the National Electrical Code requires that new construction (not existing) utilize a 4-conductor connection to an electric range. 30" Receptacle Locations: Locally approved flexible service cord or conduit must be used because terminals are not accessible after range installation. See shaded area in drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against wall. 26-1/2" 46-3/4" Note: 30" ranges conform to U.L. requirements for 0" spacing from adjacent walls below countertops. To reduce possibility of scorching *41-1/4" with optional backguard kit walls, engineering recommends a minimum of 26-1/2" 1-1/2" spacing to allow for possible extended, high-heat, no-load heating element operation. Installation information: Before installing, 46-3/4" consult installation instructions packed with product for current dimensional data. Optional accessories: Tall backguard JXS8055 (Available at additional cost) 36-1/4"+_1/4* *Dimensions from floor to top of the cooktop. Floor to top of rear vent trim is 37-1/4" Receptacle locations: Locally approved flexible service cord or conduit must be used because terminals are not accessible after range installation. See shaded area in drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against wall. 7-1/2 REAR WALL 7-1/2 7 3-1/2 5 2-1/4 For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at geappliances.com or call GE Answer Center® service, 800.626.2000. 2-1/4 CENTER LINE All GE ranges are equipped with an Anti-Tip device. The installation of this device is an important, required step in the installation of the range. Specification Revised 2/11 221003