GE CT9800SHSS Quick Specs - Page 1
GE CT9800SHSS Manual
View all GE CT9800SHSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
CT9800SH GE Café™ Series 30" Combination Double Wall Oven with Convection and Advantium® Technology Dimensions and Installation Information Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating. F Installation Information: Before installing, consult installation instructions packed with product for current dimensional data. Door handle protrudes 3" from door face. Cabinets and drawers on adjacent 45° and 90° walls should be placed to avoid interference with the handle. E Electric wall ovens are not approved for installation with a plug and receptacle. They must be hard wired in accordance with installation instructions. Note: These ovens are not approved for stackable or side-by- side installations. 21" minimum door opening allowance 21" D KW Rating 240V 7.5 208V 5.7 Breaker Size 240V 40 Amps 208V 40 Amps CL 2 x 4 or equivalent runners level with bottom of cutout and ush with sides of cutout or solid bottom oor. Suitable bracing to support runners 9-1/2" MAX. Right side only Conduit 48" Cutout depth 23-1/2" MIN. Junction box location (Junction box may be located in adjacent cabinet) B 28" MIN. to bottom of junction box Cutout width 28-1/2" MIN. 28-5/8" MAX. A C 30 '' Cutout height 42-3/16" MIN. 42-1/4" MAX. Recommended minimum cutout location from the oor 21-5/8" ATTENTION INSTALLER: All electric wall ovens must be hard-wired (direct-wired) into an approved junction box. A plug and receptacle is NOT permitted on these products. CT9800 PT9800 PT7800 CJTT39880000 NOTE: If the cabinet does not have a solid bottom, two braces or runners must be installed to support the weight of the oven. For single ovens, the runners and braces must support 200 lbs (91 kg). For double ovens, the runners and braces must support 375 lbs. (170 kg). NOTE: If marks, blemishes or the cutout opening are visible above the installed oven, it may be necessary to add wood shims under the runners and front trim until the marks or opening are covered. NOTE: If the cabinet does not have a front frame and the sides are less than 3/4" (1.9 cm) thick, shim both sides equally to establish the cutout width. Cabinet A - Overlap of oven at top of cutout B - Overlap of oven over side of edges of cutout C - Overlap of oven at bottom of cutout Oven D - Install depth E - Overall height with trim F - Overall width 30" 1" 3/4" 1" 23-1/2" 43-3/8" 29-3/4" For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at geappliances.com or call GE Answer Center® service, 800.626.2000. Listed by Underwriters Laboratories Specification Created 5/15