GE DBLR333GGWW Owners Manual - Page 7
Control Settings, Consumer Support, Troubleshooting Tips, Safety Instructions
View all GE DBLR333GGWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Safety Instructions Operating Instructions About the control settings. IMPORTANT: Clean the lint filter each time you use the dryer. ge.com 1 Fabric Care/Temperature (on some models) REGULAR For regular to heavy cottons. or COTTONS REG. HEAT MEDIUM, For synthetics, blends, delicates and items labeled permanent press. EASY CARE MED. HEAT, EASY CARE or PERMA PRESS MED. HEAT DELICATES On some models. For delicates, synthetics and items labeled tumble dry low. LOW HEAT FLUFF For fluffing items without heat. Use the TIMED DRY cycle. NO HEAT Automatic cycles automatically determine fabric dryness. Select LESS DRY if you want your clothes slightly damp at the end of the drying cycle. Select MORE DRY if you want them to feel drier. Timed cycles run for a selected time. 2 Drying Cycles COTTONS For cottons and most linens. For most loads, select OPTIMUM DRY (on some models) or select the Preferred Regular Setting marked with an *. EASY CARE/ For wrinkle-free, permanent press and delicate items, and knits. PERMANENT PRESS DELICATES For delicate items, special-care fabrics and knits. TIMED DRY Set the Cycle Selector at the desired drying time. DAMP DRY For leaving items partially damp. DEWRINKLE For removing wrinkles from items that are clean and dry or that are very lightly damp. QUICK FLUFF For freshening or fluffing up already dry clothing, fabrics, linens and pillows. Use with FLUFF NO HEAT. Provides 10 minutes of no heat tumbling. 3 Start-Close the dryer door. Select START. Opening the door during operation will stop the dryer. To restart the dryer, close the door and select START to complete the cycle. Color Logic (on some models) Select the correct FABRIC CARE setting. Match the particular color below the words with the same color on the Cycle Dial. Example: Drying a load of clothing labeled permanent press. 1 Choose the FABRIC CARE setting-for this load it would be the EASY CARE MED. HEAT (which is a particular color). 2 Turn the Cycle Dial to the area that has the same color as the FABRIC CARE setting you have chosen-for this load it would be the EASY CARE AUTOMATIC. Troubleshooting Tips Consumer Support 7