GE DPGT650EHMG Owners Manual - Page 21
Installation Instructions, CONNECTING AN ELECTRIC DRYER skip for gas dryers, WARNING, WARNING
UPC - 084691170570
View all GE DPGT650EHMG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Installation Instructions CONNECTING AN ELECTRIC DRYER (skip for gas dryers) TOOLS AND MATERIALS YOU WILL NEED FOR CONNECTING THE ELECTRICAL SUPPLY ❒ Flat- or straight-blade screwdriver (may be needed for cord strain relief) ❒ #2 Phillips-head screwdriver (for terminal connections) FOR YOUR SAFETY: WARNING Before making the electrical connection, turn off the circuit breaker(s) or remove the dryer's circuit fuse(s) at the electrical box. Be sure the dryer cord is unplugged from the wall. NEVER LEAVE THE ACCESS COVER OFF THE TERMINAL BLOCK. ❒ UL-listed strain relief (may be supplied with cord) ❒ UL-listed power cord - 30-amp - 240V - #10 AWG minimum copper conductor - Closed-loop or forked terminals with upturned ends - 3-wire (for construction before 1996) or 4-wire (for construction after 1996) ELECTRICAL CONNECTION INFORMATION FOR ELECTRIC DRYERS WARNING - To reduce the risk of fire, electrical shock and personal injury: • Do not use an extension cord or an adapter plug with this appliance. • The dryer must be electrically grounded in accordance with local codes and ordinances or, in the absence of local codes, in accordance with the NATIONAL ELECTRICAL CODE, ANSI/NFPA NO. 70. 21