GE DPVH880GJMG Owners Manual - Page 44
Installation Instructions, INSTALLING THE PEDESTAL if desired cont.
UPC - 084691169864
View all GE DPVH880GJMG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Installation Instructions INSTALLING THE PEDESTAL (if desired) (cont.) 2 PREPARE THE PEDESTAL A Pull the drawer out as far as it will go. B Remove screws from drawer slides. Slide drawer out of the base and set aside. 3 INSTALL THE PEDESTAL TO THE WASHER OR DRYER A Place the pedestal against the bottom of the unit. Check to be sure the drawer front is at the front of the washer. B Align the holes in the pedestal with the holes in the bottom of the unit. Use a Phillips screwdriver to install the 4 bolts through the pedestal and into the unit-do not tighten. FOR DRYERS ONLY: C Locate the 4 support pads from the parts package. Each pad has 2 protrusions that fit into the holes on top of the pedestal. Press the rubber pads into each set of corner holes on the top of the pedestal as shown. C Slide the pedestal toward the unit, until it is aligned front to back. Use a 7 mm socket wrench to securely tighten the bolts. NOTE: The support pads should be installed on the dryer only. DO NOT INSTALL THESE PADS ON THE WASHER PEDESTAL. 44