GE FCM5SUWW Use and Care Manual - Page 8

Preparing to Install the Freezer, Freezer Location, Clearances - temperature

Get GE FCM5SUWW PDF manuals and user guides
UPC - 084691145943
View all GE FCM5SUWW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

Operating Instructions Safety Instructions Preparing to install the freezer. Read these instructions completely and carefully. Freezer Location Your freezer should be conveniently located for day-to-day use in a dry, well-ventilated room. Do not install the freezer where the temperature will go below 0°F or above 110°F, because it will not maintain proper temperatures. Be sure to install your freezer on a floor strong enough to support it when it is fully loaded. The freezer must be solidly positioned on the floor if it is to function at its best. Shims may be used to accomplish this wherever the floor is too uneven. If the place selected for the freezer is damp or moist, place 2 X 4's (51 mm X 102 mm) under its entire length to assure adequate support. Clearances On all models, allow 3″ (76 mm) on top, back and sides for proper air circulation. Installation Instructions Consumer Support Troubleshooting Tips 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
Consumer Support
Troubleshooting Tips
Installation
Instructions
Safety Instructions
Operating Instructions
Preparing to install the freezer.
Read these instructions completely and carefully.
Freezer Location
Your freezer should be conveniently located for
day-to-day use in a dry, well-ventilated room.
Do not install the freezer where the temperature
will go below 0°F or above 110°F, because it will
not maintain proper temperatures.
Be sure to install your freezer on a floor strong
enough to support it when it is fully loaded.
The freezer must be solidly positioned on the floor
if it is to function at its best. Shims may be used to
accomplish this wherever the floor is too uneven.
If the place selected for the freezer is damp or moist,
place 2 X 4’s (51 mm X 102 mm) under its entire
length to assure adequate support.
Clearances
On all models, allow 3
″
(76 mm) on top, back
and sides for proper air circulation.
8