GE FUF21DLRWW Use and Care Manual - Page 10
To Remove the Freezer Door, Replacing the LED Light
View all GE FUF21DLRWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
CARE AND CLEANING Care and Cleaning To Remove the Freezer Door 1. Remove the plastic hinge cover by removing one screw, disconnect the wiring connector and remove the ambient thermistor from the hinge cover, and then lifting it off. 2. Remove the screws holding the hinge to the top of the FDELQHWXVLQJD3KLOOLSVVFUHZGULYHURU´VRFNHW driver. Be carefully not to damage the wiring nearby. 3. Remove the top hinge from the cabinet and lift the door up and off the lower hinge pin. Set the door aside. 4. Remove the screws from the bottom hinge. To replace the doors, reverse the order of the above instructions. NOTICE: It is very important that all hinge screws are securely tightened to ensure a secure assembly and SUHYHQWKLQJHVOLSSDJH'RQRWRYHUWLJKWHQWKHKLQJH screws. Tighten them until they are just snug, and then turn them another one-half turn. NOTE: The door swing is not reversible. Replacing the LED Light 7KH/('OLJKWLVORFDWHGEHKLQGDOLJKWOHQVLQWKHFHOOLQJ RIWKH)UHH]HUVHFWLRQ To replace the LED light: 1. Remove the top shelf (if necessary). 2. Gently push the three snap-in tabs at the front of the lens, release the lens from the liner, and pull to remove. 5HPRYHWKH/('DVVHPEO\IURPWKHPRXQWLQJWDEV 4. Gently pull the leads out and disconnect from the unit. 5HSODFHZLWKQHZ/('DVVHPEO\DQGVOLGHDVVHPEO\ back into mounting tabs. 6. Replace the light lens by sliding the tabs at the back of the lens into the slots and push up on the lens until the tabs at the front of the lens snap into place. 7 RRUGHUWKH/('DVVHPEO\SOHDVHFDOO*( $SSOLDQFHVDW*(&$5(6 GXULQJ normal business hours. Hinge Screws Plastic Hinge Cover Wiring Connector Top Hinge /LJKW/HQVLQ)UHH]HU /('$VVHPEO\ 'LVFRQQHFW/HDGV 10 49-60763-1