GE GFDS355ELMV Use and Care Manual - Page 9
About cycle options. - dryer
UPC - 084691227465
View all GE GFDS355ELMV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
About cycle options. NOTE: Not all features are available on all dryer models. GEAppliances.com Extended Tumble Minimizes wrinkles by adding approximately 60 minutes of no-heat tumbling after clothes are dry. The beeper will sound every two minutes as a reminder to remove the clothes. The ESTIMATED TIME REMAINING display will show 00. The Extended Tumble time does not get added to the cycle time on the display Damp Alert This option causes the dryer to beep when clothes have dried to a damp level. Remove items that you wish to hang dry. The DAMP ALERT will only beep when this option is selected. Removing clothes and hanging them when they are damp can reduce the need to iron some items. Delay Start Use to delay the start of your dryer. 1. Choose your dry cycle and any options. 2. Press DELAY START. You can increase the delay time in 1 hour increments using the DELAY START button. 3. Press the START pad to start the countdown. NOTES: n If the door is opened while the dryer is in DELAY START, the countdown time will not restart unless the door is closed and START has been pressed again. e-DRY Reduces the total energy consumption of specific dryer cycles by adjusting certain heat settings. Note: Cycle times will change when e-DRY is selected. This feature can be used with DELICATES, ACTIVE WEAR, EASY CARE, NORMAL/MIXED LOADS and COTTONS. Signal Alerts you that the cycle is complete. The beeper will continue to sound every minute for the next 5 minutes, until the clothes have been removed. The clothes should be removed when the beeper goes off so wrinkles don't set in. Press SIGNAL to select low, medium or high volume, or to turn the beeper off. 9