GE GFE27GMDES Installation Instructions - Page 39
Troubleshooting Tips cont
View all GE GFE27GMDES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Before you call for service... Troubleshooting Tips (cont) GEAppliances.com Problem No water or ice cube production* Water is leaking from dispenser* Possible Causes Supply line or shutoff valve is clogge Water filter is clogged Filter cartridge not properly installed Ice maker is turned off Air may be present in the water line system, causing water to drip after being dispensed What to Do Call a plumber Replace filter cartridge or remove filter and install bypass plug Remove and reinstall filter cartridge, being certain that it locks in place. Check that the ice maker is turned on. See About the Automatic Ice Maker. Dispense water for at least 5 minutes to remove air from system Photos not found* Photos not in root directory of USB Photos not in JPEG format Camera/PC used with USB cord AUTO FILL under fill/no fill* Not all containers work with AUTO FILL Container not found Unstable container Misaligned container AUTO FILL overfills* Not all containers work with AUTO FILL PRECISE FILL will not fill container* Normal, PRECISE FILL requires use of dispenser paddle Freezer cooling, fresh food not cooling Normal, when refrigerator first plugged in or after extended power outage Ice dispenser opens after closing freezer drawer * Normal Make sure the photos are in the root directory in your USB Photos must be in JPEG format Must use a USB drive Try different container See pg. 11 Try different container For a specific amount of water, select PRECISE FILL to dispense water Wait 24 hours for temperature in both compartments to reach selected temperatures. The ice dispenser door may open after closing freezer door to allow access *Select Models Only 39