GE GFSL6KKYLS Use and Care Manual - Page 4
About the controls with temperature settings., Consumer Support, Troubleshooting Tips - model
UPC - 084691190905
View all GE GFSL6KKYLS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Operating Instructions Safety Instructions About the controls with temperature settings. Not all features are on all models. Your controls will look like one of the following: Installation Instructions Consumer Support Troubleshooting Tips Location of Dispenser Controls Dispenser Models Internal Control Models Location of Internal Controls NOTE: The refrigerator is shipped with protective film covering the temperature controls. If this film was not removed during installation, remove it now. The temperature controls are preset in the factory at 38°F for the refrigerator compartment and -2°F for the freezer compartment. Allow 24 hours for the temperature to stabilize to the preset recommended settings. The temperature controls can display both the SET temperature as well as the actual temperature in the refrigerator and freezer. The actual temperature may vary slightly from the SET temperature based on usage and operating environment . Changing the Temperature Dispenser models: To change the temperature, press and release the Adjust Freezer or Adjust Refrigerator pad. The display will show the actual temperature. Tap either the Adjust Freezer or Adjust Refrigerator pad until the desired temperature is displayed. Once the desired temperature has been set, the temperature display will return to the actual refrigerator and freezer temperatures after 10 seconds. Several adjustments may be required. Each time you adjust controls, allow 24 hours for the refrigerator to reach the temperature you have set. Internal control models: To change the temperature, press and release the Freezer or Fridge pad. The display will show the actual temperature. Tap either the Freezer or Fridge pad until the desired temperature is displayed. Once the desired temperature has been set, the temperature display will return to the actual refrigerator and freezer temperatures after 10 seconds. Several adjustments may be required. Each time you adjust controls, allow 24 hours for the refrigerator to reach the temperature you have set. 4