GE GFSS2HCYSS Use and Care Manual - Page 18
INSTALLING THE REFRIGERATOR, Installation Instructions, cont., REMOVE THE FRESH FOOD, DOOR HANDLE - - refrigerator freezer
UPC - 084691206026
View all GE GFSS2HCYSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Installation Instructions INSTALLING THE REFRIGERATOR (cont.) 6 REMOVE THE FRESH FOOD DOOR HANDLE (For placement in the installation location or reversal of the handles - on some models) Stainless steel (on some models): A REMOVING THE DOOR HANDLE: Loosen the set screws with the 3/32″ A Badge Allen wrench and remove the handle. B NOTE: For Double Door models follow Mounting Fasteners the same procedure on (appearance may vary) the opposite door. 7 REMOVE THE FREEZER DOOR HANDLE Stainless steel and plastic handles: A Loosen the set screws located on the underside of the handle with the 1/8″ Allen wrench and remove the handle. NOTE: If the handle mounting fasteners need to be tightened or removed, use a 3/16″ Allen wrench. A Plastic handle (on some models): A REMOVING THE DOOR HANDLE: Depress the tab on the underside of the handle and slide the handle up and off of the mounting fasteners. REVERSING THE DOOR HANDLE (on some B models): • Remove Badge the handle mounting fasteners with A a 3/16″ Allen wrench and transfer Mounting Fasteners the handle mounting fasteners to (appearance may vary) the right side. • Remove the logo badge. • Remove and transfer the plug button to the left side of the fresh food door. NOTE: Use a flat plastic edge to prevent damaging the door. Remove any adhesive on the door with a mild detergent. Remove the paper covering on the adhesive backing on the logo badge prior to carefully attaching the badge to the door. 18