GE GFW480SPKDG Installation Instructions - Page 4

Save These Instructions - washer

Page 4 highlights

IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING. PROPER INSTALLATION This washer must be properly installed and located in accordance with the Installation Instructions before it is used. If you did not receive an Installation Instructions, you can receive one by visiting GEAppliances.com or by calling GE Appliances at 800.GE.CARES (800.432.2737). „ Ensure that the hot water hose is connected to the "H" (internal red screened) valve and the cold water hose is connected to the "C" (internal blue screened) valve. „ Install or store where it will not be exposed to temperatures below freezing or exposed to the weather, which could cause permanent damage and invalidate the warranty. „ Properly ground washer to conform with all governing codes and ordinances. Follow details in Installation Instructions. „ This washer does not include water supply hoses. GE Appliances strongly recommends the use of factory specified parts. A list of factory hoses available for purchase are listed below. These hoses are manufactured and tested to meet GE Appliances specifications. GE Appliances strongly recommends the use of new water supply hoses. Hoses degrade over time and need to be replaced every 5 years to reduce the risk of hose failures and water damage. Parts and Accessories WARNING - Electrical Shock Hazard Plug into a grounded 3 prong outlet. DO NOT remove ground prong. DO NOT use an adapter. DO NOT use an extension cord. Failure to follow these instructions can result in death, fire or electrical shock. Order on-line at GEApplianceparts.com today, 24 hours a day or by phone at 800.626.2002 during normal business hours. Part Number Accessory PM14X10002 Or PM14X10005 4 ft Rubber Water Supply Hoses 4 ft Braided Metal Water Supply Hoses WX10X10011 Tide® Washing Machine Cleaner* PM7X1 Washer Floor Tray PM7X3 Low Profile Universal Washer Floor Tray (for use with pedestal models) GFP1328PK GFP1328SK GE Appliances 28" pedestal (available color matched to your washer or dryer) NOTE: The GE Appliances RightHeight™ Design frontload washer equipped with a Built-In Pedestal™ cannot be mounted on a pedestal. WHEN NOT IN USE „ Turn off water faucets to minimize leakage if a break or rupture should occur. Check the condition of the fill hoses; GE Appliances recommends changing the hoses every 5 years. SAVE THESE INSTRUCTIONS * Tide® is a registered trademark of Procter & Gamble 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96

4
WHEN NOT IN USE
Turn off water faucets to minimize leakage if a break or
rupture should occur. Check the condition of the fill hoses;
GE Appliances recommends changing the hoses every 5
years.
Ensure that the hot water hose is connected to the “
H
(internal red screened) valve and the cold water hose is
connected to the “
C
” (internal blue screened) valve.
Install or store where it will not be exposed to
temperatures below freezing or exposed to the weather,
which could cause permanent damage and invalidate the
warranty.
Properly ground washer to conform with all
governing codes and ordinances. Follow details
in Installation Instructions.
This washer does not include water supply hoses.
GE Appliances strongly recommends the use of factory
specified parts. A list of factory hoses available for
purchase are listed below. These hoses are manufactured
and tested to meet GE Appliances specifications.
GE Appliances strongly recommends the use of new water
supply hoses. Hoses degrade over time and need to be
replaced every 5 years to reduce the risk of hose failures
and water damage.
Parts and Accessories
Order on-line at
GEApplianceparts.com
today, 24 hours a
day or by phone at 800.626.2002 during normal business
hours.
Part Number
Accessory
PM14X10002
4 ft Rubber Water Supply Hoses
Or
PM14X10005
4 ft Braided Metal Water Supply Hoses
WX10X10011
Tide
®
Washing Machine Cleaner*
PM7X1
Washer Floor Tray
PM7X3
Low Profile Universal Washer Floor Tray
(for use with pedestal models)
GFP1328PK
GE Appliances 28" pedestal (available color
GFP1328SK
matched to your washer or dryer)
NOTE:
The GE Appliances RightHeight™ Design frontload
washer equipped with a Built-In Pedestal™ cannot be
mounted on a pedestal.
PROPER INSTALLATION
This washer must be properly installed and located in accordance with the Installation Instructions before it is used.
If you did not receive an Installation Instructions, you can receive one by visiting
GEAppliances.com
or by calling
GE Appliances at
800.GE.CARES
(800.432.2737).
* Tide
®
is a registered trademark of Procter & Gamble
SAVE THESE INSTRUCTIONS
- Electrical Shock Hazard
WARNING
Plug into a grounded 3 prong outlet.
DO NOT
remove ground prong.
DO NOT
use an adapter.
DO NOT
use an extension cord.
Failure to follow these instructions can result in death,
fire or electrical shock.
IMPORTANT SAFETY INFORMATION.
READ ALL INSTRUCTIONS BEFORE USING.