GE GFWR2705HMC Use and Care Manual - Page 9
Add Steam, Delay Wash, eMonitor, Display
View all GE GFWR2705HMC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
GEAppliances.com 18 Add Steam Add Steam adds steam into the washer To use: early in the cycle to assist with loosening 1. Turn power ON and select a wash stains on the Towels/Sheets, Normal, cycle. The Add Steam option is only Whites, Bulky, Active Wear, Power available on Towels/Sheets, Normal, Clean, Sanitize or Allergen cycles. Whites, Bulky, Active Wear, Power Clean, Sanitize or Allergen cycles. 2. Select the Add Steam button to activate steam. 3. Press the Start/Pause button. 19 Delay Wash You can delay the start of a wash cycle NOTE: If you forget to fully close the for up to 24 hours. Press the Delay door, a reminder signal will beep Wash button to choose the amount reminding you to do so. of time you want to delay the start of the wash cycle. Once the desired time NOTE: If you open the door when the is reached, press the Start button. The delay is counting down, the machine will machine will count down and start enter the pause state. You must close automatically at the correct time. the door and press Start again in order to restart the countdown. 20 eMonitor (on some models) The eMonitor lights display the relative energy use of your selected cycle and options. They are provided as an energy guide and range from Good (1 light) to Better (5 lights). Some special cycles will not provide a display. 21 Display Displays the approximate time In addition, the display will, "scroll" the remaining until the end of the cycle. washer status: NOTE: The cycle time is affected by how long it takes the washer to fill. This depends on the water pressure in your home. The "smart" timer "learns" the amount of time it takes to fill your washer and adjusts the total time accordingly. Cycle status is also displayed and certain features such as Delay Wash or Steam are shown indicating they have been selected. • dOOr The washer door is open, causing the machine to be in PAUSE mode until the door is properly closed. • LOAd SenSE Sensing load size prior to fill (normal operation). Cycles that do not perform LOAD SENSE are Active Wear, Delicates, Speed Wash, Single Item, Rinse & Spin and Basket Clean. • PAUSE Cycle paused because the Start/Pause or Add a Garment button was pressed and the washer was set to Pause. Press Start button again to restart the cycle. • End End of current cycle. • OFF Washer is shutting down. The washer may need to drain the water prior to unlocking the door and shutting down. 9