GE GNE25JGKBB Use and Care Manual - Page 27
For Models With a Freezer DOOR
View all GE GNE25JGKBB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Installation Instructions H. Remove the button plugs on the left side of the cabinet across from where the hinge bracket was located and install in the holes where the bracket was removed. I. Flip the center hinge bracket and install on the left side of the cabinet where the button plugs were removed. J. Using a 1/4" Allen wrench, install the hinge pin into the center hinge bracket. For Models With a Freezer DOOR: F. Tape the freezer door shut with adhesive tape. G. Using a 1/4" Allen wrench, remove the hinge pin from the hinge bracket. The hinge pin will be used again on the opposite side. H. Remove the tape and tilt the door away from the cabinet. Lift the door off of the bottom hinge pin. I. Using a thing-blade screwdriver remove the button plug from the top left side of the door and install it on the opposite side. J. Set the door on a non-scratching surface with the inside up. K. Using a 5/16" socket/ratchet driver, remove the bolts securing the center hinge to the cabinet. L. Locate the button plugs in the kit and install them in the opposite side of center hinge. M. Flip the center hinge bracket. Using a 5/16" socket/ratchet driver, install the center hinge bolt on the left side of the cabinet and torque to 60 in-lb. N. Using a 1/4" Allen wrench, install the hinge pin into the center hinge bracket. Do not let the pin go past the bottom of the bracket. O. Using a 5/16" socket/ ratchet driver, remove the screws from the bottom hinge bracket. These will be reinstalled on the other side. Pull up on the hinge pin to remove. P. Using a Torx T-20 screwdriver, remove the screw from the cabinet and install it on the other side. Q. Using 5/16" socket/ ratchet driver, install the bottom hinge bracket and torque the screws to 60 in-lb. Remount the hinge and pin in the opposite hole on the cabinet. 27