GE GSHF5MGXWW Use and Care Manual - Page 6

Operating Instructions Safety Instructions About ClimateKeeper2.™ Installation Instructions How it Works The new ClimateKeeper2™ is the industry's most advanced refrigeration system, delivering optimum temperature and humidity performance to keep food garden fresh longer and reduce freezer burn, while maintaining E star-level efficiency. The new ClimateKeeper2 system features two evaporators-one for the refrigerator and one for the freezer. This provides two separate cooling systems for the entire unit, and separates the airflow between the fresh food and freezer sections during normal cooling operations. This ensures that the humidity levels in the fresh food section are significantly higher than in a conventional system,* allowing fresh produce and other unsealed foods to retain their moisture content and freshness longer. Moisture sensitive foods such as fresh fruit, salads, rice, etc., can now be stored on open shelves without excessive moisture loss. Due to the higher humidity in the refrigerator, you may on occasion experience fog or small amounts of moisture in the refrigerator compartment. This is normal and may come and go as different food loads and environmental conditions change. Wipe dry with a paper towel if desired. The separate airflow system minimizes the mixing of air between the two compartments, which reduces odor transfer to improve the taste of ice. The ClimateKeeper2 system also reduces the number of defrosting cycles in the freezer evaporator, thereby reducing freezer burn. *Testing shows a higher level of humidity in the Fresh Food section in ClimateKeeper2 refrigerators versus conventional units. About CustomCool.™(on some models) ExpressThaw™ ExpressChill ™ 6 How to Use Empty the pan. Place the Chill/Thaw tray in the pan. Place the items on the tray and close the pan completely. LCD Models: Access by: Home > Options > Refrigerator Options > CustomCool Pan Non-LCD Models: Select the ExpressThaw™, ExpressChill™ or SelectTemp™ pad. The display and SET light will come on. Tap the pad until the light appears next to the desired setting. Use the following chart to determine the best setting to use. s ExpressChill can be set to 15, 30 or 45 minutes. The default is 15 minutes. s To stop a feature before it is finished: For LCD Models: Go into that feature's menu and press the OFF button. For Non-LCD Models: Tap that feature's pad until no options are selected and the display is off. s During ExpressThaw and ExpressChill,the display on the controls will count down the time in the cycle (on some models). s After the ExpressThaw cycle is complete, the pan will reset to the MEAT setting (32°F [0°C]) to help preserve thawed items until they are used. s The displayed actual temperature of the CustomCool pan may vary slightly from the SET temperature based on usage and operating environment. NOTE: For food safety reasons, it is recommended that foods be wrapped in plastic wrap when using ExpressThaw. This will help contain meat juices and improve thawing performance. How to Remove and Replace the Drawer To remove: Pull the drawer out to the stop position. Lock all four swing locks by rotating them to the lock position. Rotate all four swing locks to the unlock position. Lift the front of the drawer up and out. To replace: Make sure all four swing locks are in the unlock position. Place the sides of the drawer into the drawer supports, making sure the swing locks fit on the drawer slots. Consumer Support Troubleshooting Tips