GE GTDS825EDMC Use and Care Manual - Page 5
Display and Status Lights, Cycle status lights - lighting
View all GE GTDS825EDMC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
GEAppliances.com C Display and Status Lights The display shows the approximate time remaining until the end of the cycle. In addition, this display will, "scroll" the dryer status: PAUSE The message "PAUSE" will scroll across the display when the dryer's cycle is paused. The cycle may be door CyCLE re-started by pressing the Start button. The message "door" will be displayed when the door is opened during the dryer's cycle. The message "CyCLE" will be displayed when the clothes are dry and the washer is recommending a dELAY preferred cycle for the next load (see CleanSpeak section). The message "dELAY" will be displayed when Delay Dry is initiated. It will be replaced with the estimated time when cycle starts. ES Dryer in a delay start (4 hour maximum) awaiting lower energy rates (see About Appliance Communication - Energy Smart section). Cycle status lights Shows whether the washer is in the DRYING, DAMP, or COOL DOWN cycle. Feature status lights indicate: The My Settings feature is on for this cycle. The dryer is locked - will blink once if you press any button or turn the cycle knob. The signal is on. See the Variable Signal description. The Energy Smart feature is selected. See About Appliance Communication - Energy Smart section. The Clean Lint Filter light will stay on for 15 seconds after the cycle stops. The eDry feature is selected. A Delay Dry time is set. D Drying Cycles-Sensor cycles automatically determine fabric dryness. Timed cycles run for the selected time. Timed Dry Quick Fluff/ No Heat Quick Dry Delicates Jeans Cottons Normal/Mixed Loads Casuals/ Permanent Press Active Wear Towels/Sheets Bulky Items Steam Refresh h Steam Dewrinkle Set the Cycle Selector at the desired drying time. For freshening or fluffing up already dry clothing, fabric, linens and pillows. Provides 10 minutes of no-heat tumbling. For small loads that are needed in a hurry, such as sport or school uniforms. Can also be used if the previous cycle left some items damp, such as collars or waistbands. NOTE: On some models, the time remaining in the cycle will show counting down in the display. For delicate items, special-care fabrics and knits. For jeans. For cottons and most linens. For loads consisting of cottons and poly-blends. For wrinkle-free, permanent press, delicate items and knits. For sports and exercise wear. For most towels and linens. For large coats, bed spreads, mattress covers, sleeping bags and similar large/bulky items such as blankets, comforters, jackets, and small rugs. For slightly wrinkled dry garments. Significantly reduces wrinkles. NOTE: A single extremely light fabric item may need to have an additional item included in the Steam Refresh cycle to achieve optimum results. For use with larger loads than Steam Refresh. Ideal for loads left in the dryer for an extended time. Steam Cycle (h & ) Notes: Important - The temperature setting must be set to HIGH and water must be turned on before running the steam cycles. The Extended Tumble option will be turned on. After the steam cycle, the unit will beep (if Variable Signal is on) and display "00". Do not use a steam cycle with items such as wool, leather, silk, lingerie, foam products or electric blankets. Do not use steam cycles on new clothes without first washing. Steam cycles are not intended for use with towels. 5