GE GTL17JBWBS Use and Care Manual - Page 14
Reversing The Hardware, Cont., Remove The Fresh Food Door
UPC - 084691166146
View all GE GTL17JBWBS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Installation Instructions 2 REVERSING THE DOOR SWING (CONT.) 3 REMOVE THE FRESH FOOD DOOR 3.1 Tape the door shut with masking tape. 3 REMOVE THE FRESH FOOD DOOR (CONT.) 3.5 Transfer the two screws from the opposite side of the cabinet to the screw holes vacated by the center hinge removal. 3.6 Transfer the washer (if your model has one) to the opposite side. 3.2 Using a 5/16″ hex-head socket screwdriver and a 5/16″ open-end wrench, remove the two screws holding the center hinge to the cabinet. Lift the center hinge to free its pin from the socket in the top of the door, and set hinge and screws aside. Be careful not to lose the center hinge spacer and washer. 3.7 Take one of the screws removed in step 2 and start it in the outermost screw hole on the opposite side. Do not drive it all the way down-leave enough space under the screw head for thickness of the bracket. 3.3 Remove the tape and tilt the door away from the cabinet. Lift the door from the pin in the bottom hinge bracket. (If the plastic washer sticks to the door bottom, put it back on the hinge.) 4 REVERSING THE HARDWARE 4.1 Move the bottom hinge bracket and plastic washer from the right side to the left side. Plastic Washer Switch the hinge pin to the opposite side of the bracket. Hinge Bracket 3.4 Set the door outside-up on a non-scratching surface. 14