GE GTR10HAXRWW Use and Care Manual - Page 7

Safety Instructions Operating Instructions GEAppliances.com Screw Hole Bulb Replacing the Light Bulb Moving the control to COLD does not remove power to the light circuit. The bulb is located behind the shield in the back wall. Unplug the refrigerator. Remove the shelves (if necessary). Remove the screw. Gently remove the light shield by inserting a flat head screwdriver into the slot at the top of the shield and pop it off. Replace the bulb with a 25W appliance bulb with an E12 candelabra base. NOTE: If the bulb is not available at your local hardware store, contact GE customer service. Insert the tab at the bottom of the light shield into the light bulb housing and snap into place. Replace the screw. Replace the shelves if removed. Plug in the refrigerator. Cover Preparing for Vacation For long vacations or absences, remove food and unplug the refrigerator. Clean the interior with a baking soda solution of one tablespoon (15 ml) of baking soda to one quart (1 liter) of water. Leave the doors open. Preparing to Move Secure all loose items such as shelves and drawers by taping them securely in place to prevent damage. Be sure the refrigerator stays in an upright position during moving. Installation Instructions Troubleshooting Tips Consumer Support 7