GE J1050 User Manual (English (5.2 MB)) - Page 82
If the USB option is set to [PC], If the USB option is set to [PC PTP ]
UPC - 810027013897
View all GE J1050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
By using the USB cable, you can transfer the captured photos and videos to a PC. Follow the steps below to connect the camera to a PC. 1. Start a computer to which ArcSoft software has been installed. 2. Make sure both the camera and PC are turned on. 3. Connect one end of the supplied USB cable to the USB/AV OUT port on your camera. 4. Connect the other end of the cable to an available USB port on your PC. If the USB option is set to [PC] : Turn the camera off and disconnect the USB cable. If the USB option is set to [PC (PTP) ] : Remove the camera from the system as described below before turning the camera off and disconnecting the USB cable. Windows XP Home Edition/XP Professional Click the [Safely Remove Hardware] icon in the taskbar and select [Safely remove USB Mass Storage Device] from the menu displayed. 5. Disconnect the camera once transfer is completed. 78