GE JB250RFSS Quick Specs - Page 1
GE JB250RFSS Manual
View all GE JB250RFSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
JB250RF/GF GE® 30" Free-Standing Electric Range Dimensions and Installation Information (in inches) Receptacle Locations Locally approved flexible service cord or conduit must be used because terminals are not accessible after range installation. See shaded area in drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against wall. Note: 30" ranges conform to U.L. requirements for 0" spacing from adjacent walls below countertops. To reduce possibility of scorching walls, engineering recommends a minimum of 1-1/2" spacing to allow for possible extended, high-heat, no-load heating element operation. Installation Information: Before installing, consult installation instructions for c urrent dimensional data and additional requirements. KW Rating 240V 12.1 208V 9.1 Breaker Size 40 Amps† †Note: Check local codes for required breaker size. 30 2-1/2 Acceptable electrical outlet area 25 2-1/2 29-7/8 11 47 35-3/4 to 36-1/2 25-1/2 w/o handle 28 w/handle 47-7/8 7-1/2 For answers to your Monogram® or GE® appliance questions, visit our website at geappliances.com or call GE Answer Center® service, 800.626.2000. All GE ranges are equipped with an Anti-Tip device. The installation of this device is an important, required step in the installation of the range. Specification Revised 7/13 Listed by Underwriters Laboratories 321567