GE JB255GJSA Quick Specs - Page 1

GE JB255GJSA Manual

Page 1 highlights

JB255GJ GE® 30" Free-Standing Electric Range Dimensions and Installation Information (in inches) Receptacle Locations Locally approved flexible service cord or conduit must be used because terminals are not accessible after range installation. See shaded area in drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against wall. Note: 30" ranges conform to U.L. requirements for 0" spacing from ­adjacent walls below countertops. To reduce ­possibility of scorching walls, engineering recommends a minimum of 1-1/2" spacing to allow for possible extended, high-heat, no-load heating element operation. Installation Information: Before installing, consult installation instructions for c­ urrent dimensional data and additional requirements. KW Rating 240V 12.1 208V 9.1 Breaker Size 40 Amps† †Note: Check local codes for required breaker size. 30" Free-Standing Electric Single Oven 30 4 22 Acceptable electrical 30 4 outlet area 4 22 Acceptable electrical 4 outlet area 29-7/8 29-7/8 11 11 36 to 47 36-1/2 36 to 47 36-1/2 26-1/4 w/o handle 28-3/4 w/handle 46-1/4 26-1/4 w/o handle 28-3/4 w/handle 46-1/4 5 5 For answers to your Monogram® or GE® appliance questions, visit our website at geappliances.com or call GE Answer Center® service, 800.626.2000. All GE ranges are equipped with an Anti-Tip device. The installation of this device is an important, required step in the installation of the range. Listed by Underwriters Laboratories Specification Created 11/14

  • 1
  • 2

Listed by
Underwriters
Laboratories
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
Dimensions and Installation Information (in inches)
For answers to your Monogram
®
or GE
®
appliance questions, visit our website at
geappliances.com or call GE Answer Center
®
service, 800.626.2000.
JB255GJ
GE
®
30" Free-Standing Electric Range
Specification Created 11/14
KW Rating
240V
12.1
208V
9.1
Breaker Size
40 Amps
Receptacle Locations
Locally approved flexible service cord or conduit must be used
because terminals are not accessible after range installation.
See shaded area in drawing for location of electrical outlet box.
Recommended outlet locations allow range to be installed directly
against wall.
Note:
30" ranges conform to U.L. requirements for 0" spacing
from adjacent walls below countertops. To reduce possibility of
scorching walls, engineering recommends a minimum of 1-1/2"
spacing to allow for possible extended, high-heat, no-load
heating element operation.
Installation Information:
Before installing, consult installation
instructions for current dimensional data and additional
requirements.
Note:
Check local codes for required breaker size.
30
22
4
4
5
Acceptable electrical
outlet area
29-7/8
36
to
36-1/2
11
46-1/4
28-3/4
26-1/4
47
w/handle
w/o handle