GE JB650STSS Quick Specs - Page 1

GE JB650STSS Manual

Page 1 highlights

JB650ST GE® 30" Free-Standing Electric Range 30_install_fse_ge.eps Dimensions and Installation Information (in inches) KW Rating 240V 10.5 208V 7.9 Breaker Size 40 Amps† †Note: Check local codes for required breaker size. Effective January 1, 1996, the National Electrical Code requires that new construction (not existing) utilize a 4-conductor connection to an electric range. Receptacle Locations: Locally approved flexible service cord or conduit must be used because terminals are not accessible after range installation. See shaded area in drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against wall. Installation information: Before installing, consult installation instructions packed with product for current dimensional data. 2-1/2 30-7/8" 30_install_fse_ge.eps All 30" GE gas and electric range backguards are 30-7/8" wide.* Note: 30" ranges conform to U.L. requirements Acceptable electrical outlet area for 0" spacing from ­adjacent walls below countertops. To reduce possible scorching of 30 walls, ­engineering ­recommends a minimum of 2-1/2 1-1/2" spacing to allow for possible extended, high heat, no-load heating element operation. 25 *Except these models: JGBS07, JGBS04, all GEAcceptable electrical Profile free-standing electric and gas ranges outlet area Fits most countertop backsplash applications. Consult Use & Care Manual for detailed 29-7/8 installation instructions. 46-7/8 30 25 2-1/2 2-1/2 7-1/2 Dimension from wall to front of closed oven door handle is 27-3/4 29-7/8 25-3/8 46-7/8 47-5/8 7-1/2 For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at geappliances.com or call GE Answer Center® service, 800.626.2000. Dimension from wall to front of closed oven door handle is 27-3/4. 25-3/8 47-5/8 All GE ranges are equipped with an Anti-Tip device. The installation of this device is an important, required step in the installation of the range. Listed by Underwriters Laboratories Specification Created 2/11 322017

  • 1
  • 2

Dimensions and Installation Information (in inches)
For answers to your Monogram,
®
GE Profile
or
GE
®
appliance questions, visit our website at
geappliances.com or call GE Answer Center
®
service, 800.626.2000.
JB650ST
GE
®
30" Free-Standing Electric Range
Listed by
Underwriters
Laboratories
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
Specification Created 2/11
322017
KW Rating
240V
10.5
208V
7.9
Breaker Size
40 Amps
30
25
29-7/8
46-7/8
2-1/2
7-1/2
25-3/8
47-5/8
2-1/2
Acceptable electrical
outlet area
Dimension from wall to
closed oven door hand
Dimension from wall to front of
closed oven door handle is 27-3/4.
Note:
Check local codes for required breaker size.
Effective January 1, 1996, the National Electrical
Code requires that new construction (not existing)
utilize a 4-conductor connection to an electric range.
Receptacle Locations:
Locally approved flexible
service cord or conduit must be used because
terminals are not accessible after range installation.
See shaded area in drawing for location of electrical
outlet box. Recommended outlet locations allow
range to be installed directly against wall.
Installation information:
Before installing, consult
installation instructions packed with product for
current dimensional data.
All 30" GE gas and electric range backguards
are 30-7/8" wide.*
Note:
30" ranges conform to U.L. requirements
for 0" spacing from adjacent walls below
countertops. To reduce possible scorching of
walls, engineering recommends a minimum of
1-1/2" spacing to allow for possible extended,
high heat, no-load heating element operation.
*Except these models: JGBS07, JGBS04, all GE
Profile free-standing electric and gas ranges
Fits most countertop backsplash applications.
Consult Use & Care Manual for detailed
installation instructions.
30-7/8"