GE JB870SRSS Quick Specs - Page 1

JB870SR GE® 30" Free-Standing Electric Double Oven Convection Range Dimensions and Installation Information (in inches) KW Rating 240V 14.2 208V 10.7 30-7/8" Breaker Size All 30" GE gas and electric range backguards 40 Amps† are 30-7/8" wide.* Note: 30" ranges conform to U.L. requirements †Note: Check local codes for required breaker size. for 0" spacing from ­adjacent walls below Effective January 1, 1996, the National Electrical Code requires that new construction (not existing) utilize a 4-conductor connection to an electric range. countertops. To reduce possible scorching of walls, ­engineering ­recommends a minimum of 1-1/2" spacing to allow for possible extended, high heat, no-load heating element operation. Receptacle Locations: Locally approved flexible service cord or conduit must be used because terminals are not accessible after range installation. See shaded area in drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against wall. *Except these models: JGBS07, JGBS04, all GE Profile free-standing electric and gas ranges Fits most countertop backsplash applications. Consult Use & Care Manual for detailed installation instructions. Note: 30" ranges conform to U.L. requirements for 0" spacing from adjacent walls below countertops. To reduce possibility of scorching walls, engineering recommends a minimum of 1-1/2" spacing to allow for possible extended, high-heat, no-load heating element operation. Installation information: Before installing, consult installation instructions packed with product for current dimensional data. For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. fse_dual_cavity_install.eps 30 3 Acceptable electrical outlet area Orient the electrical receptacle so the length is parallel to the floor. 24 3 29-7/8 47 25-3/4* 45 7-1/2 *Dimension from wall to front of closed oven door handle is 28-7/8. All GE ranges are equipped with an Anti-Tip device. The installation of this device is an important, required step in the installation of the range. Listed by Underwriters Laboratories Specification Revised 8/10 321561