GE JBP35DMWW Quick Specs - Page 1
GE JBP35DMWW - 30" Electric Range Manual
UPC - 084691162896
View all GE JBP35DMWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
JBP35DM GE® 30" Free-Standing QuickClean™ Electric Range Dimensions and Installation Information (in inches) KW Rating 240V 12.1 208V 9.1 Breaker Size 40 Amps† †Note: Check local codes for required breaker size. Effective January 1, 1996, the National Electrical Code requires that new construction (not existing) utilize a 4-conductor connection to an electric range. Receptacle Locations: Locally approved flexible service cord or conduit must be used because terminals are not accessible after range installation. See shaded area in drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against wall. Note: 30" ranges conform to U.L. requirements for 0" spacing from adjacent walls below countertops. To reduce possibility of scorching walls, engineering recommends a minimum of 1-1/2" spacing to allow for possible extended, high-heat, no-load heating element operation. Installation information: Before installing, consult installation instructions packed with product for current dimensional data. 30-7/8" All 30" GE gas and electric range backguards are 30-7/8" wide.* Note: 30" ranges conform to U.L. requirements for 0" spacing from adjacent walls below countertops. To reduce possible scorching of walls, engineering recommends a minimum of 1-1/2" spacing to allow for possible extended, high heat, no-load heating element operation. *Except these models: JGBS07, JGBS04, JGBP90, all GE Profile free-standing electric and gas ranges Fits most countertop backsplash applications. Consult Use & Care Manual for detailed installation instructions. For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. 30_install_fse_ge.eps 30 2-1/2 Acceptable electrical outlet area 25 2-1/2 29-7/8 46-7/8 7-1/2 Dimension from wall to front of closed oven door handle is 27-3/4 25-3/8 47-5/8 Dimension from wall to front of closed door handle is 27-3/4". All GE ranges are equipped with an Anti-Tip device. The installation of this device is an important, required step in the installation of the range. Listed by Underwriters Laboratories Specification Revised 10/08 322100