GE JEM31WF Installation Instructions - Page 3

Installation Instructions ❒ 3 INSTALL BOTTOM DUCT ASSEMBLY TO MICROWAVE OVEN A Fasten the anti-tip bracket to the bottom duct using four round-head screws. Bottom Duct FRONT Anti-Tip Bracket REAR ❒ 4 INSTALL UPPER DUCT AND TOP BRACKET A Remove two screws from back of the microwave oven. Peel off the adhesive backing from the upper duct and secure it to the microwave oven by pressing it firmly down on duct. Fasten the upper duct with the two screws just removed from the microwave oven. Round-Head Screws Round-Head Screws (4) B Install the rear duct to the bottom duct with one round-head screw. Round-Head Screw Screws from microwave oven Rear Duct B Place the top bracket on top of the upper duct, with the opening on the top bracket lined up with the opening on the duct. Attach the top bracket to the upper duct using two round-head screws. C Remove all loose items, including the turntable and turntable support, from the microwave oven. Carefully turn the oven upside down. Remove three screws (one from control side, and two from bottom rear) from microwave oven cabinet. Place the bottom duct assembly on the microwave oven bottom and fasten with four round-head screws and the screws just removed from the microwave oven. Turn the microwave oven right side up, being careful not to bend the bottom duct flange. Round-Head Screws Round-Head Screws (4) Screw from microwave oven ❒ 5 INSTALL MICROWAVE OVEN INTO CABINET A Slide the microwave oven part way into the cabinet opening. B Plug in the microwave oven. Bottom Duct Anti-Tip Assembly Anti-Tip Brace C The anti-tip bracket must be flat to the Anti-Tip Bracket cutout floor to engage correctly with the anti-tip brace as shown. Carefully slide the microwave oven back, engaging the anti-tip brace. Make sure the power cord is not mashed or cut as you slide the microwave into place. Microwave oven upside down D Center the microwave oven within the cutout opening. 3