GE JGP329SETSS Installation Instructions - Page 10

Installation Instructions COOKTOP BURNERS 1 ASSEMBLING THE COOKTOP BURNERS The electrode of the spark igniter is exposed. Be careful not to push any cooktop controls while the top of the burner is removed. Do not remove the top or touch the electrode of any burner while another burner is turned on. Electrical shock might result. A Replace the burner head onto the burner base, making sure that the head is properly oriented over the burner base and the electrode. Make sure to place the correct burner head on the correct burner base and that the burner head sits level on the burner base. The burner heads are not interchangeable. B Place the burner caps on the burner heads, making sure to place the correct burner cap on the correct burner Burner cap properly seated head. The burner caps are not interchangeable. Make sure that the burner caps are properly seated on the Burner cap not properly seated burner heads. C Make sure the pins in the burner heads match the burner base indentations and that they are properly seated in them by rotating the heads until they are level. Burner cap Burner head Locator pins Electrode Pin Make sure the indentations slot in the burner head is Burner cap positioned over the electrode. Burner head The burner cap has Stability chamber three to four pins. When replacing the cap, make sure none of Burner base the pins sits in the stability chamber. Burner base Electrode Make sure the hole Burner cap in the burner head assembly is positioned over the electrode and that Burner head assembly the burner head is fully inserted inside the burner base. A small gap between the base and head is normal. Electrode Burner base 10