GE JGS760BELTS Quick Specs - Page 1

JGS760BEL/DEL/EEL/SEL GE® 30" Slide-In Front Control Convection Gas Range DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES) NOTE: Door handle protrudes 3" from door face. Cabinets and drawers on adjacent 45° and 90° walls should be placed to avoid interference with the handle. GAS PIPE AND ELECTRICAL OUTLET LOCATIONS NOTE: Cabinets installed adjacent to slide-in ranges must have an adhesion spec of at least 194° temperature rating. INSTALLATION INFORMATION: Before installing, consult installation instructions packed with product for ­current dimensional dat2a". For all installations, instaTolwlraetlalhre 1 1/8" reRqeuarivreendt rear trim to back of range with 4 screws provided. 36 1/4" +/- 1/4" 2" To rear wall 1 1/8" Rear vent 26 7/8" w/o handle 29 1/2" w/ handle 30" 47 1/2" 36 1/4" +/- 1/4" 26 7/8" w/o handle 29 1/2" w/ handle 30" 47 1/2" 30" GAS PIPE AND ELECTRICAL OUTLE3m0Ti"n Side Wall LOCATIONS 16" max to cabinets above counter 4 1/2" 4" 0" minimum to cabinets below cooktop 18" minimum to cabinet above counter 6" right side 6" left side minimum to side wall 16" max to cabinets above counter 30" 5" 24" 13" 9" 3m0i"nesleuGacpntarpdsiclyal Side Wall 12 1/2" 14 1/2" 18" minim3u6m" to cabinet above counter 2" 30" 4 1/2" 4" 0" minimum to cabinets below cooktop 6" right side 6" left side minimum to side wall 5" 24" 13" 9" esleuGacpnatrpdsiclyal14 1/2" 12 1/2" 36" 2" 30" For answers to your Monogram, GE Café™ Series, GE Profile™ Series or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000. ADA COMPLIANT All GE ranges are equipped with an Anti-Tip device. The installation of this device is an important, required step in the installation of the range. Specification Revised 6/17