GE JGSP28DENBB Use and Care Manual - Page 10

Using the oven controls. Throughout this manual, features and appearance may vary from your model. CONTROL PRESS + AND - AND HOLD FOR 3 SECONDS Oven Control, Clock and Timer Features and Settings BAKE/TEMP RECALL Pad KITCHEN TIMER ON/OFF Pad Touch this pad to select the bake function. Touch this pad to select the timer feature. BAKE Light Flashes while in edit mode-you can change Then press + and - pads to adjust time. TIMER Light the oven temperature at this point. Glows when Flashes while in edit mode-you can change the oven is in bake mode. the set time at this point. Glows when the timer START/ON Pad Must be touched to start any cooking or cleaning function. has been activated. Flashes again when the time has run out until the control is reset. CLOCK Pad Display Shows the time of day, oven temperature, whether the oven is in the bake, broil or selfcleaning mode and the times set for the timer To set clock, touch this pad twice and then touch the + and - pads. The time of day will flash in display when oven is first turned on. START TIME Pad or automatic oven operations. The display will show "PrE" while preheating. When the oven reaches the selected temperature, the oven control will beep and the display will show the oven temperature. Function Error Code If "F- and a number or letter" flash in the display and the oven control signals, this indicates a function error code. If the function error code appears during the selfcleaning cycle, check the oven door latch. The latch handle may have been moved, even if only slightly, from the latched position. Make sure the latch is moved to the right as far as it will go. Use along with the COOKING TIME or SELF CLEAN pads to set the oven to start and stop automatically at a time you set. START TIME Time Light Flashes while in edit mode-you can change the start time set time at this point. Glows when the function has been activated. COOKING TIME Pad Touch this pad and then touch the + or - pads to set the amount of time you want your food to cook. The oven will shut off when the cooking time has run out. COOKING TIME Light Touch the CLEAR/OFF pad. Allow the oven to cool for one hour. Put the oven back into operation. If the function error code repeats, disconnect the power to the range and call for service. Flashes while in edit mode-you can change set time at this point. Glows when function has been activated. Flashes again when the time has run out until the control is reset. AUTOMATIC OVEN Light This lights anytime the oven has been 10 programmed using the COOKING TIME or START TIME functions.