GE JKP30SPSS Quick Specs - Page 2
Built-In Single Wall Oven - 27
UPC - 084691195382
View all GE JKP30SPSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
JKP30SP GE® 27" Built-In Single Wall Oven Sealed Burner Gas Cooktop Installation (Pub. 1-G003 pg. 107) May 11, 1993 (Pub. 1-G003 pg. 107) May 11, 1993 Undercounter Installation Dimensions Gas or electric cooktops may be installed over this oven. See cooktop installation instructions for cutout size. See label on top of oven for approved cooktop models. Gas or electric connections 240V / 208V for gas cooktop must be 25 Junction Box Location located in an adjacent accessible location to the right 5 25" MIN. 25 1/4" MAX. 27 5/8" MIN. 28 1/8" MAX. Allow 1" unit overlap all edges 22" MIN. Above Support Platform 24 36" Typical Countertop Height 3/4" Support Platform Required Must Support 150 Lbs. Sealed Burner Gas Cooktop Installation Dimensions Standard Burner Gas Cooktop Installation Dimensions 90° Street el 45° Elbow Cabinet sides 5" To center of 2" diameter hole from countertop 2" Diameter hole (20-7/8" from front of countertop to hole center) 90° Street el 45° Elbow 3-7/16" To center of 2" diameter hole from countertop 2" MIN. diameter hole (23-1/4" from front surface of countertop) Cabinet sides Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating. Note: Oven is rated for use only under 30" standard or sealed burner gas and selected 30" CleanDesign and Calrod® electric cooktops. Installation Information: Before installing, consult installation instructions packed with product for current dimensional data. Electric wall ovens are not approved for installation with a plug and receptacle. They must be hard wired in accordance with installation instructions. For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. All GE ranges are equipped with an Anti-Tip device. The installation of this device is an important, required step in the installation of the range. Specification Created 5/09 Listed by Underwriters Laboratories 320445