GE JKP35SPSS Quick Specs - Page 1

JKP35SP GELo®cate27" Built-In Double Wall Oven junction box for 24"models Dim56e"nMsiIoNn. sabaonvde Installation Information (in inches) cutout floor 10 KW Rating Allow 3/4" 24A0V 6.8for overlap over all edges 208V 5.1of cutout CL 2" x 4" or equivalent runners Breaker Size 240CV 30 Amps 208V 30 Amps Note: BCabinets installed aHdjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating. For 27" built-in single ovens, if marks, blemGishes or the cutout opening is visible above the installed oven, it may be necessary to add wood shims under the runners and front trim are Ccoonvdeuriet d. until the marks or openin2g1s Xoiv4u."truoflnor noer)rsNCw(a4oa8btll-eis1n:/se2Dh"tosoLoouarnlndghd)2dab1odne"ordaprMlweolaIpNepcFe.rernsodintortgnuodaaedvsoja3idc"eifnnrottem4r5fed°roaeonnrdcfea9cw0e°i.th the handle. allowance Electric wall ovens are not approved for installation with a plug and receptacle. They must be hard wired in accordance with installation instructions. Suitable bracing to support runners 18" Over centerline of cabinet (must support 300 lbs.) Cabinet 27" A - Cabinet width required 27" min. B - Minimum cabinet depth 23-5/8" C - Opening width 25" min. - 25-1/4" max D - Opening height 50-1/8" max E - Recommended minimum cutout location from floor 13-1/4" Oven F - Overall depth* 23-5/8" G - Overall height with trim 51-7/8" - 52-3/4" Overall height without trim 51" H - Overall width 26-5/8" *Depth including door handle is approximately 26-7/10" min. to 26-8/10" max. Locate junction box for 27"models either 5" MIN. below cutout floor or 44" MIN. above cutout floor Access from adjacent cabinet D required E Minimum cutout location from floor Installation Information: Before installing, consult installation instructions packed with product for ­current dimensional data. For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. Locate junction box for 24"models 56" MIN. above cutout floor 10 Allow 3/4" A for overlap over all edges of cutout C B H G Conduit 2" X 4" or (48-1/2" Long) equiv. runners F (cutout floor) 21" MIN. door opening allowance All GE ranges are equipped with an Anti-Tip device. The installation of this device is an important, required step in the installation of the range. Specification Created 5/09 Suitab bracin to suppo runne Cabinet 21 A - Cabinet w B - Minimum C - Opening D - Opening E - Recomm Oven F - Overall d G - Overall h Overall h H - Overall w *Depth includi Listed by Underwriters Laboratories 320375