GE JKP90BMBB Dimensions - Page 1
GE JKP90BMBB - 27-in Double Microwave/Thermal Wall Oven Manual
View all GE JKP90BMBB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
JKP90BM/CM/WM GE® 27" Built-In Double Microwave/Thermal Wall Oven 10 D tion E Dimensions and Installation Information (in inches) KW RaAting 240V 6.4 208V 4.8 BreakeCr Size 240V 30 Amps Allow 3/4" for overlap of oven over all edges of cutout CL 2 x 4 or equivalent runners 208V 30 Am2p" Xs 4" or B equiv. runners H Note: Cabinets installed adjacent to wall ovens must have an adhesion spGec of at least a 194°F temperature rating. Suitable bracing to support runners 18" over centerline of cabinet (must support 275 lbs.) Note: if marks, blemishes or the cutout opening is visible above the installed oven, it may be n2e1cessary to add wood sChoimndusitunder the runners and front trim (48-1/2" until the marksloonrg)openinFgs are covered. NCaobtein:eDtosoarA2nh1dllo"adwnfordarmlwceilneepiamrrsrouatomnrnuceodafedsja3c"efnrotm45d°oaonrdfa9c0e°.walls should be ptolaacdejadcteonat cvoorindeirnst,erference with the handle. drawers, walls, etc. Electric wall ovens are not approved for installation with a plug and receptacle. They must be hard wired in accordance with installation instructions. Cabinet 27" A - Cabinet width required 27" min. B - Minimum cabinet depth 23-5/8" C - Opening width 25" min. - 25-1/4" max D - Opening height 41-1/4" max E - Minimum cutout location from floor 22" Oven F - Overall depth* 23-5/8" G - Overall height with trim 43" - 43-7/8" Overall height without trim 42-1/8" H - Overall width 26-5/8" *Depth including door handle is approximately 26-7/10" min. to 26-8/10" max. Installation Information: Before installing, consult installation instructions packed with product for current dimensional data. 10 Recommended junction box locations. Locate junction box either 5" MIN. below cutout floor or 48" MIN. above cutout floor D Access from adjacent cabinet required Minimum cutout location E from floor For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. A Allow 3/4" for overlap of oven over all edges of cutout C 2" X 4" or B equiv. runners H G 21 Conduit (48-1/2" long) F Allow minimum of 21" for clearance to adjacent corners, drawers, walls, etc. S b to s ru Cabin A - B - C - D - E - Oven F - G - H - *Dept 26-8/1 All GE ranges are equipped with an Anti-Tip device. The installation of this device is an important, required step in the installation of the range. Specification Created 1/07 Listed by Underwriters Laboratories 320374