GE JKP90DPWW Use and Care Manual - Page 33
Sabbath Feature
UPC - 084691196488
View all GE JKP90DPWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Support Using the Sabbath Feature. (Designed for use on the Jewish Sabbath and Holidays.) (on some models) GEAppliances.com The Sabbath feature can be used for baking/roasting only. It cannot be used for broiling, self-cleaning or Delay Start cooking. NOTE: The oven light comes on automatically (on some models) when the door is opened and goes off when the door is closed. The bulb may be removed. See the Oven Light Replacement section. On models with a light switch on the control panel, the oven light may be turned on and left on. ⊃ ⊃ ⊃ + When the display shows ⊃ the oven is set in Sabbath. When the display shows ⊃ the oven is baking/roasting. How to Set Sabbath Feature for Regular Baking/Roasting NOTE: To understand how the oven control works, practice using regular baking (non-Sabbath) before entering Sabbath mode. Make sure the clock shows the correct time of day. Press and hold both the Bake and Broil Hi/Lo pads, at the same time, until the display shows SF. NOTE: If bake or broil appears in the display, the Bake and Broil Hi/Lo pads were not pressed at the same time. Press the Clear/Off pad and begin again. Tap the Delay Start pad until SAb bAtH appears in the display. Press the Start pad and ⊃ will appear in the display. Press the Bake pad. No signal will be given. Press the number pads in order to set the desired temperature. No signal or temperature will be given. Press the Start pad. To adjust the oven temperature, press the Bake pad and enter the new temperature using the number pads Press the Start pad. NOTE: The Clear/Off and Cooking Time pads are active during the Sabbath feature. After a random delay period of approximately 30 seconds to 1 minute, ⊃ will appear in the display indicating that the oven is baking/roasting. If ⊃ does not appear in the display, start again at step 4. 33