GE JM250DFCC Quick Specs - Page 1
GE JM250DFCC Manual
View all GE JM250DFCC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
JM250DF GE 27" Drop-In Electric Range 27" Drop-In Ranges Dimensions (in inches) Dimensions and Installation Information (in inches) Note: This appliance has been approved for 0" spacing to adjacent surfaces above the cooktop. However, a 6" minimum spacing to surfaces less than 15" above the cooktop and adjacent cabinet is recommended to reduce exposure to steam, grease splatter and heat. Optional Backguard (Available at additional cost) JX27RBK (Black) JX27RWH (White) Installation Information: Before installing, consult installation instructions for current dimensional data and additional requirements. Important: This range is designed to hang from the countertop. It does not rest on the floor. If necessary, build up sides to 1-1/2" thick to provide screw anchor surface and countertop support Countertop Range side support These screws are anti-tip devices and must be installed 18 in the front and rear 24-3/16 Trim section for countertop with post formed or raised front edge 30" MIN. to bottom of cabinet over range KW Rating rim section2fo4r0V 10.6 opuonsttefrotrompewd2it0h8V 8.0 or raised Breaker Size front edge240V 40 Amp† 13/32 MIN. to om of binet ver nge 208V 40 Amp† †NOTE: Check local codes for required breaker size Countertop cutout top view Inside back wall of cabinet or rear wall 1-1/2" MIN. Clearance 3/8" MIN. Flat 22-3/16 2 27-1/8 28-7/16 28-1/2" MIN. 27" Between cabinets 22-3/16 Back of range 20 Door to front of closed door clearance Locate junction box anywhere in shaded area Conduit is 48-1/2" long 21-3/4" cabinet face to rear of cutout 22-7/8" Cutout 23-3/8" MIN.* Flat counter 13/32 *If counte dimensio In replace JX27R op 2" 26-1/4" MAX. Smooth cut Locate junction box anywhere in shaded area Conduit is 48-1/2" long *If countertop edge is formed, this dimension must extend to flat area In replacement installation, use JX27R optional backguard, if required For answers to your Monogram® or GE® appliance questions, visit our website at geappliances.com or call GE Answer Center® service, 800.626.2000. * ADA qualified based on Uniform Federal Accessibility Standards All GE ranges are equipped with an Anti-Tip device. The installation of this device is an important, required step in the installation of the range. Listed by Underwriters Laboratories Specification Created 6/13 320908