GE JMP31WCWW Quick Specs - Page 1

JMP31WC/CL/BL GE Profile™ 27" Drop-In Electric Range Dimensions and Installation Information (in inches) KW Rating 240V 9.8 208V 7.3 Note: Cabinets installed adjacent to drop-in ranges must have an adhesion spec of at least 194° temperature rating. Optional Backguard (Available at additional cost) JX27RBK (Black) JX27RWH (White) JX27RCD (Bisque) Note: All 27" Drop-In Electric Ranges conform to U.L. requirements for minimum spacing between range and side walls below countertop. Installation Information: Before installing, consult installation instructions packed with product for current dimensional data. 27" Drop-In Ranges Dimensions (in inches) SpacemakerTM 27" Drop-In Electric Ranges (Pub. 1-G003 pg 103) May 11, 1993 type enlarged 8/03 -km Important: This range is designed to hang from the countertop. It does not rest on the floor. If necessary, build up sides to 1-1⁄2" thick to provide screw anchor surface and countertop support Countertop Range side support These screws are anti-tip devices and must be installed in the front and rear 24-3/16 22-3/16 2 18 27-1/8 28-7/16 Trim section for countertop with post formed or raised front edge 30" MIN. to bottom of cabinet over range 28-1/2" MIN. 27" Between cabinets 22-3/16 Back of range 20 Door to front of closed door clearance Locate junction box anywhere in shaded area Conduit is 48-1/2" long 13/32 Adjoinin vertical cabinet or wall above countert 3" MIN. (Both si *If count dimensio In replac JX27R o For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. All GE ranges are equipped with an Anti-Tip device. The installation of this device is an important, required step in the installation of the range. Listed by Underwriters Laboratories Specification Created 4/06 220803