GE JP5030SJSS Installation Instructions - Page 6

Installation Instructions INSTALLING THE COOKTOP (CONT.) 4 LOCATE MOUNTING PARTS (Cont.) Alternate Installation: You can order an alternate installation kit WB01X25470 with wing nuts and brackets from your dealer. See diagram for instructions. Open the cabinet door. Install the second screw through the bracket and tighten. Then tighten the first screw. Install thumbscrew until it touches the bottom of the countertop. Cooktop Countertop IMPORTANT: Turn the thumbscrew until it touches the bottom of the countertop. Do not overtighten. 5 INSERT COOKTOP INTO CUTOUT Insert the cooktop centered into the cutout opening. Make sure the front edge of the countertop is parallel to the cooktop. Make final check that all required clearances are met. Hold Down Bracket Cooktop A When making the wire connections, use the entire length of conduit provided. The conduit must not be shortened. B With the cooktop in place, open the front of the cabinet door. C Insert the wires from the conduit through the opening of the junction box. Red Strain Relief Clamp Ground Black D Connect the red and black leads from the cooktop conduit to the corresponding leads in the junction box. Red Ground wire location Black E Once the connections are made, secure wires together using wire nuts. Red Ground Strain Relief Clamp Black Attach Hold Down Brackets to cabinet. 6