GE JT5000EJES Quick Specs - Page 1

GE JT5000EJES Manual

Page 1 highlights

Cutout depth 23-1/2" MIN 9-1/2" MAX. F Junction box JT5000EJ location Cutout depth 9-1/2" MAX. GDiECmo®endn3usit0io"nBsuainltd-IInnsStainlglaletJlouiCcnoac2tnot3iio2bj-onu1nI2no/nn2v"tb"cteftMootoicxoImoNtnriombofonaxtWionaClultoOut wviedtnh Mos4t0"30" Wall Cabinets can be used with this unit. 22" to bottom of 28-1/2" MIN. 28-5/8" MAX. NoCotnedu: iTt hese ovens are not approvejdunction box Cutout width for s4t0a"ckable installations. Cabinets 28-1/2" MIN. installDed adjacent to wall ovens must have 28-5/8" MAX. an adhesion spec of at least a 194°F A E Cutout height E F Conduit 40" Conduit Cutout depth 40" 23-1/2" MIN Junction box location D 22" to bottom of junction box Cutout width 28-1/2" MIN. 22 " 28-5/8" MAX temperature rating. D 22" Door handle protrudes 3" from door face. Cabinets and drawers on adjacent 45° and 90° walls should be placed to avoid 22" interference with the handle. B 27-1/4" MIN. A C 27-5/16" MAX. Cutout height B 27-1/4" MIN. C 27-5/16" MAX. 23" minimum D door opening allowance 22 " A B C Electric wall ovens are not approved for installation with a plug and receptacle. They must be hard wired in accordance Recommended cutout2l3o"cmatinioimnum Recommended cutout location fromdoooroorpening 32a-l1lo/2w"ance with installation instructions. Installation Information: Before installing, consult installation instructions packed with product for ­current dimensional data. from oor 32-1/2" 30'' 30'' PT7050 CL 2 x 4 or 30'' equivalent runners level with bottom of cutout and ush with sides of cutout Side-by-side installations require PT7050 JT5000 CL 2 x 4 or 2 x 4aotrleast 2" between cutouts. e2qxu4ivoarlent runners laelaeennqvvddueeillvwwauKulsiesiW ththhnhwtbRwbrioutaiothntttthonstiimeondsrimegsdosfeoocsfufoctcuofutucottuoututotut oorr ssoolliidd2b4bo0otVttotomm4.2ooor.or. JT5000 JT3000 JT3000 JT1000 JT5J0T100000 CabineCt abinet 30" 30" A - OveArl-apOovfeorvleanpaotftoopveonf cauttotuotp of cutout 1" 1" B - OveBrl-apOovfeorvleanpoovfeor sviedne oofveedrgseids oefocuf teodugtes of c3u/4to" ut Su3i/ta4b"le equivalent runners level with bottom of cutout and ush with sides of cutout Suitableor solid bottom oor. bracing to support (must support 200 lbs.) runners 208V 3.2 Breaker Size C - OveCrl-apOovfeorvleanpaotfboovtteonmaotfbcouttotoutm of cutout 1-1/4" Oven Oven to1sbu-r1pacp/i4onr"gt (must support 200 lbs.) runners or solid bottom oor. Cabinet A - Overlap of oven at top of cutout B - Overlap of oven over side of edges C - Overlap of oven at bottom of cutou Oven D - Install depth E - Overall height with trim F - Overall width 240V 20 Amps D - InstDal-l dIenpstthall depth 23-1/2" 23-1/2" Dimension and installation bbs.s).) 208V 20 Amps E - OveEra-llOheviegrhatlwl hitehigtrhimt with trim F - Overall width F - Overall width 28-5/8" 29-3/4" 28-5/8" 29-3/4" information are shown in inches. For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at geappliances.com or call GE Answer Center® service, 800.626.2000. Listed by Underwriters Laboratories Specification Created 5/15

  • 1
  • 2
  • 3

DIMENSIONS AND INSTALLATION INFORMATION
Dimension and installation
information are shown in inches.
Listed by
Underwriters
Laboratories
Specification Created 5/15
For answers to your Monogram,
®
GE Profile
or GE
®
appliance questions, visit our website
at geappliances.com or call GE Answer Center
®
service, 800.626.2000.
JT5000EJ
GE
®
30" Built-In Single Convection Wall Oven
MOST 30" WALL CABINETS CAN BE
USED WITH THIS UNIT.
NOTE:
These ovens are not approved
for stackable installations.
Cabinets
installed adjacent to wall ovens must have
an adhesion spec of at least a 194°F
temperature rating.
Door handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45°
and 90° walls should be placed to avoid
interference with the handle.
Electric wall ovens are not approved for
installation with a plug and receptacle.
They must be hard wired in accordance
with installation instructions
.
INSTALLATION INFORMATION:
Before installing, consult installation
instructions packed with product for
current dimensional data.
Side-by-side installations require
at least 2" between cutouts.
KW RATING
240V
4.2
208V
3.2
BREAKER SIZE
240V
20 Amps
208V
20 Amps
F
E
22
"
Conduit
40"
Cutout depth
23-1/2" MIN
B
Cu
28
28
23" minimum
door opening
allowance
22" to
bottom of
junction box
Junction box
location
9-1/2"
MAX.
D
C
L
Suitable
bracing
to support
runners
(must support 200 lbs.)
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
Cabinet
30"
A – Overlap of oven at top of cutout
1"
B – Overlap of oven over side of edges of cutout
3/4"
C – Overlap of oven at bottom of cutout
1-1/4"
Oven
D – Install depth
23-1/2"
E – Overall height with trim
28-5/8"
F
– Overall width
29-3/4"
JT5000
B
30''
A
C
Cutout width
28-1/2" MIN.
28-5/8" MAX.
Recommended
cutout location
from floor
32-1/2"
Cutout height
27-1/4" MIN.
27-5/16" MAX.
ox