GE JTP35SPSS Quick Specs
GE JTP35SPSS Manual
 |
UPC - 084691194750
View all GE JTP35SPSS manuals
Add to My Manuals
Save this manual to your list of manuals |
GE JTP35SPSS manual content summary:
- GE JTP35SPSS | Quick Specs - Page 1
adhesion spec Aof at least a 194°F temperature rating. Electric wall ovens are n2o1t approved for installation with a plug and receptacle. They must be hard wired in accordance with insBtallation instructions. Door handle protrudes 3" from Mdoinoimr fuamcec.utout location CabinetCs and drawers on - GE JTP35SPSS | Quick Specs - Page 2
JTP35SP GE® 30" Built-In Double Wall Oven Features and Benefits • Self-clean Oven (upper oven only) - Self-clean allows you to spare yourself from the trouble and effort it takes to scrub the oven interior. The oven does all the work! • Super-large Oven Capacity - Remarkably large oven interior is
-
1 -
2
 |
 |
Dimensions and Installation Information (in inches)
For answers to your Monogram,
®
GE Profile
™
or
GE
®
appliance questions, visit our website at
ge.com or call GE Answer Center
®
service,
800.626.2000.
Listed by
Underwriters
Laboratories
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
Specification Created 5/09
320145
JTP35SP
GE
®
30" Built-In Double Wall Oven
KW Rating
240V
6.9
208V
5.2
Breaker Size
240V
30 Amps
208V
30 Amps
Note:
Cabinets installed adjacent to wall ovens
must have an adhesion spec of at least a 194°F
temperature rating.
Electric wall ovens are
not approved for installation with a plug
and receptacle. They must be hard wired in
accordance with installation instructions
.
Door handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45° and 90°
walls should be placed to avoid interference with
the handle.
Installation Information:
Before installing,
consult installation instructions packed with
product for current dimensional data.
21" minimum
Door Opening
Allowance
B
B
A
A
Cutout height
51-13/16" MIN.
51-15/16" MAX.
Minimum cutout location
12" from the floor.
Cutout depth
23-1/2" MIN
5
47" to
bottom of
junction box
Cutout width
28-1/2'' MIN.
28-5/8'' MAX.
21
Cabinet
width 30"
C
E
D
MOST 30'' WALL CABINETS CAN BE USED WITH THIS UNIT.
THE OPENING BETWEEN THE INSIDE WALLS MUST BE AT LEAST 28-1/2'' WIDE.
Conduit
48-1/2"
Junction box
location
n
C
L
2 x 4 or
equivalent
runners
Suitable
bracing
to support
runners
21-5/8"
over centerline
of cabinet
(must support 325 lbs.)
Cabinet
30"
A – Overlap of oven over side of edges of cutout
11/16"-3/4"
B – Overlap of oven at top and bottom of cutout
1"
Oven
C – Overall depth*
23-1/2"
D – Overall height with trim
53-3/8"
Overall height without trim
52-7/8"
E
– Overall width
29-3/4"
*Depth including door handle is approximately 26-6/10" min. to
26-9/10" max.